12kw 3 Phase Titanium Evolution Pool Heater
Home > Swimming Pools > Pumps, Heaters & Cleaners > Pool and Outdoor Heaters > 12kw 3 Phase Titanium Evolution Pool Heater
Description and Information
12kw 3 Phase Titanium Evolution Pool Heater
Premium Elecro Heaters are not the cheapest Above Ground Pool Heater we sell but they are by far the most reliable and trustworthy. If you want a Pool Heater that is British Made, fully equipped and pre-wired with many safety features not included in other Swimming Pool heaters, including flow switch (no pump interlock required), twin thermostats and contactor then this is the one for you.
Premium Elecro Pool Heaters have been designed specifically for Above Ground Swimming Pools and as with all Pool Heaters will only work when the Swimming Pool Pump is on. An electric heater cannot heat pools that do not have a filter pump.
The Evolution Pool Heater
Evolution model pool heaters are the market leading electric swimming pool heaters that are perfect for use on all types of pool, from small splasher pools to larger inground pools. All Evolution models are supplied fully equipped and pre-wired including flow switch, control thermostat, overheat safety thermostat and contactor for easy and cost effective installation.
All models are available in either Stainless Steel 316l or Titanium, for salt pools and include a unique reversible flow switch, which allows water flow from either direction. A 24 hour time clock can be added as an option.
Evo models have become the choice of pool professionals due to their ease of installation and unbeatable reliability. They are available in outputs from 2-24kW, in 1 and 3 phase.
Power Requirements
Power Output - Voltage/Phase - Amperage
1 Phase Models
2-kW - 230/1 - 9
3-kW - 230/1 - 13
4.5-kW - 230/1 - 20
6-kW - 230/1 - 27
9-kW - 230/1 - 40
12-kW - 230/1 - 53
15-kW - 230/1 - 66
18-kW - 230/1 - 79
3 Phase Models
6-kW - 400/3 - 9
9-kW - 400/3 - 13
12-kW - 400/3 - 18
15-kW - 400/3 - 22
18-kW - 400/3 - 26
24-kW - 400/3 - 35
Technical Specification
Stainless Steel
Heating Elements: Incoloy 825
Flow Tube: Stainless Steel BS316
Control Thermostat: 0-40°C(1°C Differential)
Safety Thermostats: 50°C Manual Reset
Flow Requirements: Minimum 1000ltr/hr - Maximum 13000ltr/hr
Control Housing: Abs (Flame retardant, UV Stabilised)
Water Connections: 1.5” BSP/ 50mm
Service Pressure: 5 Bar
Titanium
Heating Elements: Pure Titanium
Flow Tube: Pure Titanium
Control Thermostat: 0-40°C(1°C Differential)
Safety Thermostats: 50°C Manual Reset
Flow Requirements: Minimum 1000ltr/hr - Maximum 13000ltr/h
Control Housing: Abs (Flame retardant, UV Stabilised)
Water Connections: 1.5” BSP/ 50mm
Service Pressure: 5 Bar
Why Buy Elecro?
With these easy to fit Elecro Pool Heaters we supply two hose tails that will join the pool heater to the corrugated pool hose that is supplied with all above ground pools to carry the water through the pump and filter. All that needs to be done is to connect the pool heater to the correct electrical supply; obviously a qualified and certified electrician should carry this out.
The 3kW heaters can be connected to the mains via a standard 13 amp plug in conjunction with an RCD, but any larger electric pool heaters will need to be hard wired in and a cable run from it’s own spur also RCD protected. After the electricity supply is fitted the Elecro Pool Heater is connected by cutting one of the flat cuffs on the corrugated hose and attaching to either end of the Elecro pool heater using the Hose Tails we supply. Easy.
The Elecro Pool Heater should be sited after the water has passed through the Pool Pump & Filter on the way back into the pool and secured to a base so that it cannot topple over. A plank of wood is ideal. It is essential to have an inverted U bend in the corrugated pipe after it has left the pool heater, this ensures that if there is a malfunction with your filter pump the Elecro Pool Heater will act like a sump and the element will not burn out. Running the hose over a brick or block works exceptionally well. But don’t worry we include all these details and more with every heater we sell.
Pool Heaters do not flash heat water as an electric shower would, so the heater will need to run for a few hours a day to increase the temperature. A solar cover is essential if you have a heater as they will not only help heat the pool by up to 8°C on their own but more importantly it will help retain the heat. Our Solar covers can retain up to 66% of the heat, which will obviously save you a great deal of money.
Below is a rough guide to the size Elecro Pool Heater that you will need for your Swimming Pool. It is only a rough guide so our advice would be to give us a call and get “Advice Without The Price” before you spend your hard earned cash.
Recommended Heater Sizes for ABOVE GROUND POOLS -
Pool Diameter / UK Gallons(Litres) / kW - Kilo Watts
12' x 3' / 1761-gal(7994-ltr) / 4.5-kW
15' x 3' / 2752-gal(12494-ltr) / 6-kW
15' x 4' / 3854-gal(17492-ltr) / 9-kW
18' x 4' / 5548-gal(25187-ltr) / 9-kW
Recommended Heater Sizes for IN GROUND POOLS -
Dimension L x W x D / UK Gallons / (Litres) kW - Kilo Watts
20' x 10' x 4.5' / 4983-gal(22620-ltr) / 9-kW
24' x 12' x 4.5' / 7175-gal(32573-ltr) / 12-kW
30' x 15' x 4.5' / 11211-gal(50895-ltr) / 18-kW
Premium Elecro Heaters are not the cheapest Above Ground Pool Heater we sell but they are by far the most reliable and trustworthy. If you want a Pool Heater that is British Made, fully equipped and pre-wired with many safety features not included in other Swimming Pool heaters, including flow switch (no pump interlock required), twin thermostats and contactor then this is the one for you.
Premium Elecro Pool Heaters have been designed specifically for Above Ground Swimming Pools and as with all Pool Heaters will only work when the Swimming Pool Pump is on. An electric heater cannot heat pools that do not have a filter pump.
The Evolution Pool Heater
Evolution model pool heaters are the market leading electric swimming pool heaters that are perfect for use on all types of pool, from small splasher pools to larger inground pools. All Evolution models are supplied fully equipped and pre-wired including flow switch, control thermostat, overheat safety thermostat and contactor for easy and cost effective installation.
All models are available in either Stainless Steel 316l or Titanium, for salt pools and include a unique reversible flow switch, which allows water flow from either direction. A 24 hour time clock can be added as an option.
Evo models have become the choice of pool professionals due to their ease of installation and unbeatable reliability. They are available in outputs from 2-24kW, in 1 and 3 phase.
Power Requirements
Power Output - Voltage/Phase - Amperage
1 Phase Models
2-kW - 230/1 - 9
3-kW - 230/1 - 13
4.5-kW - 230/1 - 20
6-kW - 230/1 - 27
9-kW - 230/1 - 40
12-kW - 230/1 - 53
15-kW - 230/1 - 66
18-kW - 230/1 - 79
3 Phase Models
6-kW - 400/3 - 9
9-kW - 400/3 - 13
12-kW - 400/3 - 18
15-kW - 400/3 - 22
18-kW - 400/3 - 26
24-kW - 400/3 - 35
Technical Specification
Stainless Steel
Heating Elements: Incoloy 825
Flow Tube: Stainless Steel BS316
Control Thermostat: 0-40°C(1°C Differential)
Safety Thermostats: 50°C Manual Reset
Flow Requirements: Minimum 1000ltr/hr - Maximum 13000ltr/hr
Control Housing: Abs (Flame retardant, UV Stabilised)
Water Connections: 1.5” BSP/ 50mm
Service Pressure: 5 Bar
Titanium
Heating Elements: Pure Titanium
Flow Tube: Pure Titanium
Control Thermostat: 0-40°C(1°C Differential)
Safety Thermostats: 50°C Manual Reset
Flow Requirements: Minimum 1000ltr/hr - Maximum 13000ltr/h
Control Housing: Abs (Flame retardant, UV Stabilised)
Water Connections: 1.5” BSP/ 50mm
Service Pressure: 5 Bar
Why Buy Elecro?
With these easy to fit Elecro Pool Heaters we supply two hose tails that will join the pool heater to the corrugated pool hose that is supplied with all above ground pools to carry the water through the pump and filter. All that needs to be done is to connect the pool heater to the correct electrical supply; obviously a qualified and certified electrician should carry this out.
The 3kW heaters can be connected to the mains via a standard 13 amp plug in conjunction with an RCD, but any larger electric pool heaters will need to be hard wired in and a cable run from it’s own spur also RCD protected. After the electricity supply is fitted the Elecro Pool Heater is connected by cutting one of the flat cuffs on the corrugated hose and attaching to either end of the Elecro pool heater using the Hose Tails we supply. Easy.
The Elecro Pool Heater should be sited after the water has passed through the Pool Pump & Filter on the way back into the pool and secured to a base so that it cannot topple over. A plank of wood is ideal. It is essential to have an inverted U bend in the corrugated pipe after it has left the pool heater, this ensures that if there is a malfunction with your filter pump the Elecro Pool Heater will act like a sump and the element will not burn out. Running the hose over a brick or block works exceptionally well. But don’t worry we include all these details and more with every heater we sell.
Pool Heaters do not flash heat water as an electric shower would, so the heater will need to run for a few hours a day to increase the temperature. A solar cover is essential if you have a heater as they will not only help heat the pool by up to 8°C on their own but more importantly it will help retain the heat. Our Solar covers can retain up to 66% of the heat, which will obviously save you a great deal of money.
Below is a rough guide to the size Elecro Pool Heater that you will need for your Swimming Pool. It is only a rough guide so our advice would be to give us a call and get “Advice Without The Price” before you spend your hard earned cash.
Recommended Heater Sizes for ABOVE GROUND POOLS -
Pool Diameter / UK Gallons(Litres) / kW - Kilo Watts
12' x 3' / 1761-gal(7994-ltr) / 4.5-kW
15' x 3' / 2752-gal(12494-ltr) / 6-kW
15' x 4' / 3854-gal(17492-ltr) / 9-kW
18' x 4' / 5548-gal(25187-ltr) / 9-kW
Recommended Heater Sizes for IN GROUND POOLS -
Dimension L x W x D / UK Gallons / (Litres) kW - Kilo Watts
20' x 10' x 4.5' / 4983-gal(22620-ltr) / 9-kW
24' x 12' x 4.5' / 7175-gal(32573-ltr) / 12-kW
30' x 15' x 4.5' / 11211-gal(50895-ltr) / 18-kW
Whats Also Available in Pool and Outdoor Heaters
Price : £257.99
(View More Details)
(View More Details)
Pool and Accessories from Bestway and Intex inc Swimming Pools, Swimming Pool Chemicals, Hot Tub Spas, Swimming Pool accessories, Heat Pumps & Swimming Pool covers.
© 2009 Pools 4 Fun. All rights reserved
Parts of the Just Sport Group
